Name: Spotting Fluid Stuck Breaker
Brand: Fujairah Chemical
Availability: InStock

Part No: RXSOL-81-8190-310

RXSOL Spotting Fluid Stuck Breaker is environmentally friendly highly effective stuck Pipe spotting fluid for oil and Water Based muds. It is liquid blends of surfactant and lubricant,

Category

Drilling Fluids & Mud Oil Field chemicals

RXSOL Spotting Fluid Stuck Breaker is environmentally friendly highly effective stuck Pipe spotting fluid for oil and Water Based muds. It is liquid blends of surfactant and lubricant, emulsifiers and Filter cake cracking agents of varying chemical nature formulated to serve as water in oil emulsifier and oil wetting agents and can be weighed as per requirement.

Chemical additives such as Pipe Free Agent Additives play a vital role in the oil and gas industry by preventing drill pipes from becoming stuck or "differentially stuck" during drilling operations. Excessive friction between the drill string and the borehole wall can occur when drilling mud becomes overly viscous or when filter cake formation increases adhesion. These conditions can lead to costly downtime, fishing operations, and potential equipment damage.

RXSOL Chemicals is a leading manufacturer and global supplier of high-performance Pipe Free Agent Additives designed to reduce torque and drag, lower surface tension, and improve drilling efficiency in challenging well conditions.

Application

RXSOL Spotting Fluid Stuck Breaker used to free stuck pipe which has downhole problem frequently encountered in drilling operations.

Where to use Pipe Freeing Agent / Spotting Agent in Oilfield?

Differentially stuck drill pipe
Stuck tubing operations
Casing freeing operations
Downhole tool release
Key seat sticking conditions
High torque and drag situations
Directional drilling operations
Fishing operations
Drill string lubrication
Preventive anti-sticking treatments

Operational Benefits

Reduces drilling downtime
Improves stuck pipe recovery success
Lowers mechanical stress on drilling tools
Enhances drilling efficiency
Helps reduce torque and drag
Minimizes costly fishing operations

Performance Benefits

Excellent penetration capability
Stable at elevated temperatures
Effective in oilfield environments
Compatible with diesel systems
Good lubricity performance
Improved pipe movement response

Dose

RXSOL Spotting Fluid Stuck Breaker is typical Recommended Treatment to Prepare spotting fluid is 1-1.5 Gal/bbl of Spotting fluid required. The material can be diluted by adding Diesel.

RXSOL PIPE FREEING AGENT penetrates rapidly into the interface between the pipe surface and formation wall or filter cake.

The product works by:

Reducing adhesion forces
Lowering friction coefficient
Weakening filter cake bonding
Providing lubricating film formation
Enhancing pipe mobility

This results in improved chances of successfully freeing stuck pipe while reducing operational stress on drilling equipment.

Technical specifications

Physical Properties:

PROPERTIES	VALUE
Appearance	Brownish oily liquid
Specific Gravity	0.90-0.98
PH	4.0-6.5
Miscibility	Completely miscible in diesel and Dispersible in Water
Thermal Stability	>160oC
Flash Point	>1100C

Supply location

Spotting Fluid Stuck Breaker manufacturer and supplier in India, UAE, Oman, Canada - Mumbai., Gandhidham, Chennai, Visakhapatnam, Kolkata, Fujairah, Sharjah, Ajman, Dubai, Abudhabi, Muscat - Oman, Canada BC

Useful area

Advanced Manufacturing by RXSOL Chemicals

As a trusted supplier of oilfield chemicals, RXSOL Chemicals manufactures Pipe Free Agent Additives using advanced production technology and stringent quality control systems. Our formulations are engineered to meet the demanding requirements of onshore and offshore drilling operations worldwide.

Each product is developed to deliver:

Excellent lubrication properties
Superior anti-sticking performance
Compatibility with water-based and oil-based mud systems
Stable performance under high-temperature and high-pressure conditions
Operational Benefits of Pipe Free Agent Additives
Improved Flow Performance

Paraffin, wax, and asphaltene deposition can impair drilling and production efficiency. Pipe Free Agent Additives help reduce these deposits and improve fluid flow through the system.

Reduced Downtime

Stuck pipe incidents often require time-consuming remediation and can halt operations. These additives minimize the occurrence of such problems, reducing maintenance and operational delays.

Cost Savings

By preventing drilling interruptions and reducing equipment wear, operators benefit from lower maintenance costs and improved productivity.

Environmental Advantages

Effective anti-sticking formulations reduce the need for aggressive cleaning chemicals and help lower the risk of spills and leaks.

Enhanced Safety

Blocked or stuck drilling equipment can create hazardous operating conditions. Pipe Free Agent Additives contribute to safer and more reliable drilling operations.

Customized Solutions for Every Drilling Challenge

RXSOL Chemicals offers a broad range of Pipe Free Agent Additives tailored for different geological formations and drilling conditions. Our technical specialists work closely with customers to recommend the most effective solution based on:

Mud system composition
Formation characteristics
Temperature and pressure conditions

Remarks / Precaution

RXSOL PIPE FREEING AGENT is a specially formulated high-performance lubricating and penetrating fluid developed to release stuck drill pipes, tubing, casing, and downhole tools caused by differential sticking, key seating, wall sticking, or mechanical binding during drilling and oilfield operations.

The product is a carefully balanced blend of penetrating agents, lubricity enhancers, dispersants, wetting agents, and hydrocarbon-compatible additives designed to rapidly penetrate between the pipe and filter cake formation, reducing sticking forces and enabling efficient pipe release.

RXSOL PIPE FREEING AGENT exhibits excellent diesel miscibility and water dispersibility, allowing versatile field application in both oil-based and water-based drilling systems.

The formulation maintains high thermal stability and excellent lubricating characteristics under elevated downhole temperatures and pressure conditions.

Note

Advantages:

In case of stuck pipe problem, it allows quick and effective operation
Can be used with Diesel oil, Mineral Oil, Crude and Oil Base muds
It is compatible with fresh and salt water Drilling Fluids and can be added in active mud system without adversely effecting other properties
Thermally Stable
Improves Lubricity

Packaging:

RXSOL Spotting Fluid Stuck Breaker is packed in 210Liter drums. Private Labeling and customized packaging is also available on request.

Safety and Handling:

RXSOL Spotting Fluid Stuck Breakermust be handled as a Industrial chemical, wearing protective equipment and observing the precautions as mentioned in the MSDS.

Request a quote

Pricing and availability for Spotting Fluid Stuck Breaker are provided on request. Send us your requirement and packing size and our team will get back to you.

Part No: RXSOL-81-8190-310

Enquire about this product ← Back to all products

Safety data (MSDS)

Part Number	RXSOL-81-8190-310
Product Name	Spotting Fluid Stuck Breaker

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

STOCK POINT : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat

Phone	+91 22 27815542 / 41
Fax	+91 22 2781 1318 :::AOH :0091 9821214367
Email	mail@rxmarine.com

This product is classified as dangerous in accordance with the Preparations Directive 1999/45/EC.

Name	EC. No.	CAS-No.	Content	Classification
2-ETHYL HEXANOL	203-234-3	104-76-7	5-10%	Xi;R36/38. R52.
Benzene Sulphonic Acid	416-730-1	98-11-3	5-10%
AgNO3	231-853-9	7761-88-8	1
FUELS, DIESEL; GASOIL - UNSPECIFIED	269-822-7	68334-30-5	30-60%	R40
ISO-BUTANOL	201-148-0	78-83-1	1-5%	R10 R41 R67
NAPHTHALENE	202-049-5	91-20-3	1	R22 N;R50/53
1,2,3-Trimethylbenzene	208-394-8	526-73-8	1-5%	R36
SOLVENT NAPHTHA (PETROLEUM), HEAVY AROMA KEROSINE - UNSPECIFIED	265-198-5	64742-94-5	5-10%	R65
Proprietory Blend of emulsifying agents	-	-	5-10%	-

The full Text for all R-Pherases are Displayed in Section 16

Odour	Solvent odour.
Appearance	Liquid, Pale Yellow
Contact with eyes	Risk of serious damage to eyes (R41).
Contact with skin	Causes irritation, Prolonged skin contact will result in defatting of the skin, leading to irritation, and in some cases, dermatitis .
Inhalation	Vapours or aerosols may cause irritation of eyes, nose and respiratory tract, In cases of severe exposure, shortness of breath may develop.
Ingestion	Harmful: may cause lung damage if swallowed (R65).

INHALATION :	Move the exposed to fresh air at once provide rest, warmth and fresh air. perform artificial respiration if breathing has stoped when breathing is difficult, properly trained personnel may assist affected person by administering oxygen. Get medical attention if any discomfort continues.
INGESTION	DO NOT INDUCE VOMITING! NEVER MAKE AN UNCONSCIOUS PERSON VOMIT OR DRINK FLUIDS! Rins mouth thoroughly. Drink plenty of water. Provide rest, warmth and fresh air Get medical attention if any discomfort continues.
SKIN CONTACT	Remove affected person from source of contamination. immediately remove contaminated clothing. Wash the the skin immediately with soap and water. Get medical attention if irritation persists after washing
EYE CONTACT	Promptly wash eyes with pleanty of water while lifting the eye lids. Continue to rinse for at least 15 minutes. Get Medical attention if any discotinues.

EXTINGUISHING MEDIA	Use: Water spray. foam. Dry chemicals carbon dioxide (CO2).
SPECIAL FIRE FIRE FIGHTING PROCEDURES	Cool Containers exposed to flames with water until well after the fire is out.
SPECIFIC HAZARDS	By fire, toxic gases may be formed (COx, NOx)
PROTECTIVE MEASURES IN FIRE	Full Protective equipment including suitable respiratory protection

PERSONAL PRECAUTIONS

Wear Suitable Protective clothing to Prevent skin contact. Use respiratory protection in confined areas.

SPILL CLEAN UP METHODS

Wear necessary protective equipment. Avoid contact with skin or inhalation of spillage, dust or vapour. stop leak if possible without risk. Absorb in vermiculite, dry sand or earth and place into containers. Do not contaminate water sources or sewer. Inform Authorities if large amounts are involved. Flush with plenty of water to clean spillage area. Do not let Washing down water contaminate ponds or waterways.

Usage Precautions	Avoid spilling skin and eye contact. ventilate well avoid breathing vapours. use approved respirator if air contamination is above accepted level.
STORAGE PRECAUTION	Store in tightly closed original container in a dry, cool and well - ventilated place . keep containers tightly closed. Avoid contact with oxidising agents.

INGREDIENT COMMENTS	WEL=Workplace Exposure Limits
ENGINEERING MEASURES	Provide adequata ventilation Observe Workplace Exposure limits and minimise the risk of inhalation of vapours.
RESPIRATORY EQUIPMENT	If ventilation is insuffcient, suitable respiratory protection must be provided.
HAND PROTECTION	Nitrile gloves are recommended, but be aware that the liquid may penetrate the gloves. Frequent change is advisable.
EYE PROTECTION	Use approved safety goggles or face shield.
OTHER PROTECTION	Wear appropriate clothing to prevent any possibility of skin contact.
HYGINENE MEASURES	Wash at the end of each work shift and before eating, smoking and using the toilet. wash promptly if skin become wet or contaminated. promptly remove any clothing that becomme contaminated. use appropriate skin crem to prevent drying of skin.

APPEARANCE	Liquid
COLOUR	Clear to Amber
RELATIVE DENSITY	0.9-0.95 @ 25.C
VISCOSITY	˂15 at 30C
FLASH PONIT (.C)	9°C (>48.2°F)
POUR POINT	-28
pH	5-8

Chemical Stability:Stable under normal conditions of use and storage.
Incompatibility:Strong oxidizing agents such as Nitrates,
Perchlorates or SulfuricAcid, heat, sparks, open flame. Will attack some forms of plastics, rubber and coatings.
Hazardous Decomposition Products:
May form Carbon monoxide and Carbon dioxide when heated to decomposition.
Hazardous Polymerization:Will not occur.

LD50, Oral , Rat: (636 mg/kg, details of toxic effects not reported other than lethal dose value.
Delayed and immediate effects and also chronic effects from short and long term exposure Short term exposure

Potential immediate	Not available. effects
Potential delayed effects	Not available. Potential chronic health effects
General	No known significant effects or critical hazards
Carcinogenicity	No known significant effects or critical hazards.
Mutagenicity	No known significant effects or critical hazards.
Teratogenicity	No known significant effects or critical hazards.
Developmental effects	No known significant effects or critical hazards.
Fertility effects	No known significant effects or critical hazards.
Numerical measures of toxicity Acute toxicity estimates
Route	ATE value
Oral	976.6 mg/kg
Dermal	3245.9 mg/kg
Inhalation (gases)	410289.5 ppm
Inhalation (vapors)	26.06 mg/l

Efficient data are available to evaluate the short and long term effects of Aromatic Hydrocarbon to aquatic life plants, birds, or land animals.
Chemical Fate Information: Aromatic Hydrocarbon Solvent is non -persistent in water with a half-life of less than 2 days. This material is not expected to significantly bioaccumulate.When released into the soil or into water, this material is expected to quickly evaporate.

Absorb with suitable inert material (vermiculite, dry sand, earth) and place in a chemical waste container for proper disposal in an approved waste disposal facility for incineration in a chemical incinerator equipped with scrubber and afterburner. Do not flush to sewer.
Ventilate area of spill. Have extinguishing agent available in case of fire. Eliminate all sources of ignition. Use non-sparking tools and equipment. Always dispose of in accordance with local, state and federal regulations

Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Vapor from product residues may create a highly flammable or explosive atmosphere inside the container. Do not cut, weld or grind used containers unless they have been cleaned thoroughly internally. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

D.O.T. Shipping Name: Aromatic Hydrocarbon MixtureFlammable Liquid Mixture

ROAD TRANSPORT (ADR)
	ADR class	3
RAIL TRANSPORT (RID)
	RID class no.	3
SEA TRANSPORT (IMDG)
	IMDG class	3
AIR TRANSPORT (IATA/ICAO)
	IATA/ICAO class	3

U.S. DOT 49 CFR 172.101:
PROPER SHIPPING NAME: Flammable Liquid Mixture ID NUMBER: UN1993
HAZARD CLASS OR DIVISION: 3
PACKING GROUP: II

TRANSPORTATION OF DANGEROUS GOODS: Transport within user’s premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage of flammable liquid.

LAND TRANSPORT ADR/RID:
PROPER SHIPPING NAME: Flammable Liquid Mixture UN NUMBER: UN1993
ADR/RID CLASS: 3
CLASSIFICATION CODE: C6
PACKING GROUP: II

AIR TRANSPORT IATA/ICAO:
PROPER SHIPPING NAME: Flammable Liquid Mixture IATA/ICAO CLASS: 8
PACKING GROUP: II

MARITIME TRANSPORT IMDG:
PROPER SHIPPING NAME: Flammable Liquid Mixture UN NUMBER: UN1993
IMDG CLASS: 3 PACKING GROUP: II

OSHA Status:These items meet the OSHA Hazard Communication Standard (29 CFR 1910.1200) definition of a hazardous material.
TSCA Status:All components of this solution are listed on the TSCA Inventory or are mixtures (hydrates) of items listed on the TSCA Inventory.
Sara Title III:

Section 302 Extremely Hazardous Substances:Not Applicable
Section 311/312 Hazardous Catagories:Acute, Fire:Yes; Pressure, Reactivity: No
Section 313 Toxic Chemicals:Not Applicable
WHMIS: B-2: Flammable and Combustible Material. Flammable Liquid. D-2B: Poisonous and Infectious Material.
Materials causing other toxic effects

The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties.The data given here only applies when product used for proper application(s). The productis not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer.

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.