|
Porduct Name |
RODINE Sol IC600 |
|
Part Number |
RXSOL-25-1098-050 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
|
Phone |
+91 22 20871200 - 1400 |
|
Fax |
+91 22 27612100 :::AOH :0091 9821214367 |
|
Email |
mail@rxmarine.com |
|
Website |
www.rxmraine.com |
|
Hazardous Component(s) |
Cas No |
Whight % |
|
2-Butoxyethanol |
111-76-2 |
30 - 50 |
|
Alcohols, C16-18 and C18-unsatd., Ethoxylated
|
68920-66-1 |
10 - 30 |
Acetic acid, hydroxy compds. with acetophenone-formaldehyde-
(1R,4aS,10aR)-1,2,3,4,4a,9,10,10 aoctahydro-1,4a-dimethyl-7-(1-methyle |
683748-05-2 |
10 - 30 |
|
2-Propyn-1-ol, compd. with 2- methyloxirane |
38172-91-7 |
5 - 10 |
|
Acetophenone |
98-86-2 |
0.1 - 1 |
|
Glycolic acid |
79-14-1 |
0.1 - 1 |
Exact percentages may vary or are trade secret. Concentration range is provided to assist users in providing appropriate protections.
Precautionary Statements
|
Prevention |
Keep away from heat, sparks, open flames, hot surfaces - no smoking. Wash affected area thoroughly after handling.
Do not eat, drink or smoke when using this product. Wear protective gloves, eye protection, and face protection. |
|
Response |
IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. IF ON SKIN: Wash with plenty of water.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing. If skin irritation occurs: Get medical attention. Take off contaminated clothing.
In case of fire: Use foam, dry chemical or carbon dioxide to extinguish.
|
|
Storage |
Store in a well-ventilated place. Keep cool. |
|
Disposal |
Dispose of contents and/or container according to Federal, State/Provincial and local governmental regulations. |
|
Inhalation |
If mist or vapor of this product is inhaled, remove person immediately to fresh air. Seek medical attention if symptoms develop or persist. |
|
Skin contact |
Remove contaminated clothing and footwear. For skin contact, flush with large amounts of water. Seek immediate medical attention. |
|
Eye Contact |
In case of contact with the eyes, rinse immediately with plenty of water for 15 minutes, and seek immediate medical attention. |
|
Ingestion |
Get immediate medical attention. Do not induce vomiting. |
|
Symptoms |
See Section 11. |
|
Notes to physician |
Treat symptomatically and supportively. |
|
Extinguishing media |
Foam, dry chemical or carbon dioxide. Water may be an ineffective extinguishing medium. |
|
Special firefighting procedures |
Wear full protective clothing. Wear self-contained breathing apparatus. |
|
Unusual fire or explosion hazards |
Do not cut, weld, solder, drill, grind, or expose containers to heat, flame, sparks, or other sources of ignition. |
|
Hazardous combustion products |
Irritating and toxic gases or fumes may be released during a fire. |
|
Environmental precautions |
Wear appropriate protective equipment and clothing during clean-up. Prevent further leakage or spillage
if safe to do so. Eliminate all sources of ignition or flammables that may come into contact with a
spill of this material. Do not allow product to enter sewer or waterways. |
|
Clean-up methods |
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Dispose of according to Federal, State and local governmental regulations. |
|
Handling |
Avoid contact with eyes, skin and clothing. Wash thoroughly after handling. Avoid breathing vapors or mists of this product. Do not take internally. For industrial use only. Ground and bond all equipment as required (when transferring products). |
|
Storage |
For safe storage, store between 50 °F (10°C) and 104 °F (40°C) Keep container tightly closed and in a cool, well-ventilated place away from incompatible materials. Do not pressurize, cut, heat or weld containers. Empty product containers may contain product residue. Do not reuse empty containers. |
Employers should complete an assessment of all workplaces to determine the need for, and selection of, proper exposure controls and protective equipment for each task performed.
|
Hazardous Component(s) |
ACGIH TLV |
OSHA PEL |
AIHA WEEL |
OTHER |
|
2-Butoxyethanol |
20 ppm TWA |
50 ppm (240
mg/m3) PEL
(SKIN)
|
None |
None |
|
Alcohols, C16-18 and C18-unsatd.,
ethoxylated
Alcohols, C16-18 and C18-unsatd., ethoxylated
|
None |
None |
None |
None |
|
Acetic acid, hydroxy-, compds. with acetophenoneformaldehyde-(1R,4aS,10aR)-1,2,3,4,4a,9,10,10aoctahydro-1,4a-dimethyl-7-(1-methyle |
None |
None |
None |
None |
|
2-Propyn-1-ol, compd. with 2-
methyloxirane
|
None |
None |
None |
None |
|
Acetophenone |
10 ppm TWA |
None |
10 ppm (50
mg/m3) TWA
|
None |
|
Glycolic acid |
None |
None |
None |
None |
|
Engineering controls |
Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product. |
|
Respiratory protection |
If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided. |
|
Eye/face protection |
Wear chemical goggles; face shield (if splashing is possible). |
|
Skin protection |
Wear impervious gloves for prolonged contact. Gloves should be tested to determine suitability for prolonged contact. Use of impervious apron and boots are recommended. |
|
Physical state |
Liquid |
|
Colour |
Amber |
|
Odour |
Aromatic |
|
Odor threshold |
Not available |
|
pH |
3.5 - 5.0 (1% solution) |
|
Vapor pressure |
20 mm hg (20 °C (68°F)) calculated |
|
Boiling point/range |
> 200 °F (> 93.3 °C)calculated |
|
Melting point/ range |
0 °F (-17.8 °C |
|
Specific gravity |
0.98 - 1.00 at 68 °F (20°C) |
|
Vapor density |
Not determined |
|
Flash point |
189 °F (87.22 °C) Tagliabue closed cup |
|
Flammable/Explosive limits - lower |
Not applicable |
|
Flammable/Explosive limits - upper |
Not applicable |
|
Autoignition temperature |
Not determined |
|
Flammability |
Not applicable |
|
Evaporation rate |
Not determined |
|
Solubility in water |
Complete |
|
Partition coefficient (n-octanol/water) |
Not determined |
|
VOC content |
45.9 % EPA Method 24 |
|
Viscosity |
Not available |
|
Decomposition temperature |
Not available |
|
Stability |
Stable at normal conditions. |
|
Hazardous reactions |
None under normal processing |
|
Hazardous decomposition products |
Upon decomposition, this product may yield oxides of nitrogen and ammonia, carbon dioxide, carbon monoxide and other low molecular weight hydrocarbons. |
|
Incompatible materials |
This product may react with strong oxidizing agents. This product may react with strong reducing agents. This product may react with strong alkalies. |
|
Reactivity |
Not available.
|
|
Conditions to avoid |
Store away from incompatible materials. |
|
Relevant routes of exposure |
Skin, Inhalation, Eyes |
|
Inhalation |
This product is irritating to the respiratory system. Repeated inhalation may be harmful; lung irritation and serious central nervous system disorders may result. Excessive inhalation of this material causes headache, dizziness, nausea and incoordination. |
|
Skin contact |
Contact with liquid may produce severe skin irritation including redness and inflammation. A component in this product may be absorbed through the skin, especially if skin is damaged. |
|
Eye contact |
Contact can cause moderate to severe irritation and possible injury to the eyes. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. |
|
Ingestion |
Ingestion can cause gastrointestinal irritation, nausea, vomiting and diarrhea. May be harmful or fatal if swallowed. |
|
Hazardous Component(s) |
LD50s and LC50s |
Immediate and Delayed Health Effects |
|
2-Butoxyethanol |
Oral LD50 (Rat) = 560 mg/kg
Oral LD50 (Mouse) = 1.2 g/kg
Oral LD50 (Rabbit) = 0.32 g/kg
Oral LD50 (Rat) = 1.48 g/kg
Oral LD50 (Mouse) = 1,519 mg/kg
Dermal LD50 (Rabbit) = 400 mg/kg
Inhalation LC50 (Rat, 4 h) = 523 ppm
Inhalation LC50 (Rat, 4 h) = 545 ppm
|
Blood, Central nervous system, Irritant,
Kidney, Liver
|
|
Alcohols, C16-18 and C18-unsatd., ethoxylated |
Inhalation LC50 (Rat, 4 h) = > 1.6 mg/l |
Allergen, Irritant, Kidney |
|
Acetic acid, hydroxy-, compds. with
acetophenone-formaldehyde-
(1R,4aS,10aR)-1,2,3,4,4a,9,10,10aoctahydro-1,4a-dimethyl-7-(1-methyle
|
None |
No Records |
|
2-Propyn-1-ol, compd. with 2- methyloxirane |
None |
No Data |
|
Acetophenone |
Oral LD50 (Rat) = 0.81 g/kg
Oral LD50 (Rat) = 3.0 g/kg
|
Blood, Central nervous system, Eyes, Irritant |
|
Glycolic acid |
Oral LD50 (Rat) = 1,950 mg/kg
Inhalation LC50 (Rat, 4 h) = 14 mg/l
Inhalation LC50 (Rat, 4 h) = 7.7 mg/l
Inhalation LC50 (Rat, 4 h) = > 5.2 mg/l
Inhalation LC50 (Rat, 4 h) = 3.6 mg/l
|
Corrosive, Irritant, Kidney, Metabolic, Respiratory |
|
Hazardous Component(s) |
NTP Carcinogen |
IARC Carcinogen |
OSHA Carcinogen
(Specifically Regulated )
|
|
2-Butoxyethanol |
No |
No |
No |
|
Alcohols, C16-18 and C18-unsatd., ethoxylated |
No |
No |
No |
|
Acetic acid, hydroxy-, compds. with
acetophenone-formaldehyde-
(1R,4aS,10aR)-1,2,3,4,4a,9,10,10aoctahydro-1,4a-dimethyl-7-(1-methyle
|
No |
No |
No |
|
2-Propyn-1-ol, compd. with 2- methyloxirane |
No |
No |
No |
|
Acetophenone |
No |
No |
No |
|
Glycolic acid |
No |
No |
No |
|
Ecological information |
Not available. |
|
Recommended method of disposal |
Dispose of according to Federal, State and local governmental regulations. |
The transport information provided in this section only applies to the material/formulation itself, and is not specific to any packaging.
Canada Transportation of Dangerous Goods - Ground
|
Proper shipping name |
Not regulated |
|
Hazard class or division |
None |
|
Identification number |
None |
|
Packing group |
None |
International Air Transportation (ICAO/IATA)
|
Proper shipping name |
Not regulated |
|
Hazard class or division |
None |
|
Identification number |
None |
|
Packing group |
None |
Water Transportation (IMO/IMDG)
|
Proper shipping name |
Not regulated |
|
Hazard class or division |
None |
|
Identification number |
None |
|
Packing group |
None |
Canada Regulatory Information
|
CEPA DSL/NDSL Status |
One or more components are not listed on, and are not exempt from listing on either the Domestic Substances List or the Non-Domestic Substances List. |
United States Regulatory Information
|
TSCA 8 (b) Inventory Status |
All components are listed as active or are exempt from listing on the Toxic Substances Control Act (TSCA) inventory. |
|
Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.
|