|
Product Name |
RXSOL-81-1586-211 |
|
Product Type |
Heat Transfer Fluids SH |
Application : Most commonly use as Heat Transfer Liquid and Antifreeze
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Chennai, Visakhapatnam, Kolkata, Fujairah, Muscat, Canada
|
Phone |
+91 22 65113333 / 5555 / 9999 / 27815540/41 |
|
Fax |
+91 22 2781 1318 :::AOH :0091 9821214367 |
|
Email |
mail@rxmarine.com |
|
Chemical Name
|
CAS Number
|
EC Number
|
Percentage |
|
Proprietery Mixture with Anti Corrosion Additives
|
:::
|
:::
|
>50 |
|
Ethylene Glycol |
107-21-1 |
203-473-3 |
>40 |
|
Sodium 2-Ethylhexanoate |
19766-89-3 |
243-283-8 |
>3 |
|
Boron Mixture |
1303-964 |
215-540-4 |
0.5-1.5 |
Hazard description: Not applicable.
Information concerning particular hazards for human and environment: Not applicable.
|
General information |
No special measures required. |
|
After inhalation
|
Get medical attention if symptoms occur, Supply fresh air, consult doctor in case of complaints. On priority pass fresh air and keep at rest in a position comfortable for breathing.
|
|
After skin contact
|
Generally the product does not irritate the skin. However Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur.
|
|
After eye contact
|
Rinse opened eye for several minutes under running water. Also Continue to rinse for at least 10 minutes. Get medical attention if furhter irritation occurs.
|
|
After swallowing
|
If symptoms persist consult doctor.
|
Suitable extinguishing agents: Use fire extinguishing methods suitable to surrounding conditions. Extinguishing media : : : Use dry chemical, CO₂, alcohol-resistant foam or water spray (fog). Suitable extinguishing media
Protective equipment: No special measures required.
Person-related safety precautions: Not required.
Measures for environmental protection:Dilute with plenty of water. Do not allow to enter sewers/ surface or ground water.
Measures for cleaning/collecting: Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Additional information: No dangerous substances are released.
Handling:
Information for safe handling:
Handling:
Information for safe handling: No special requirement
Information about fire - and explosion protection: No special measures required.
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
Information about fire - and explosion protection: No special measures required.
Storage:
Requirements to be met by storerooms and receptacles: No special requirements.
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
Additional information about design of technical facilities: No further data; see item 7.
|
Ingredients with limit values that require monitoring at the workplace: |
|
57-55-6 propane-1,2-diol |
WEEL (USA)
WEL (Great Britain) |
10 mg/m³
474* 10** mg/m³, 150* ppm
*total vapour and particulates **particulates |
Additional information: The lists valid during the making were used as basis.
Personal protective equipment:
General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
Respiratory protection: Not required.
Protection of hands: The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
Material of gloves:The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and
varies from manufacturer to manufacturer.
Penetration time of glove material:The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Eye protection: Goggles recommended during refilling.
|
General Information
|
|
Form
|
Fluid - Liquid
|
|
Colour
|
Colourless
|
|
Odour
|
Nearly odourless
|
|
Change in condition
|
|
Freezing point/Melting range
|
-19°C
|
|
Boiling point/Boiling range
|
162°C
|
|
Flash point
|
> 100°C
|
|
Ignition temperature
|
371°C
|
|
Danger of explosion |
Product does not present an explosion hazard. |
|
Explosion limits |
|
|
Lower |
2.6 Vol % |
|
Upper |
12.6 Vol % |
|
Vapour pressure at 20°C |
0.11 hPa |
|
Density at 20°C |
1.1 g/cm³ |
|
Solubility in / Miscibility with water |
Fully miscible. |
|
pH-value (- g/l) |
9.5 |
|
Viscosity |
|
Dynamic at 25°C |
46 mPas |
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions No dangerous reactions known.
Dangerous decomposition products: No dangerous decomposition products known.
|
Acute toxicity: |
|
LD/LC50 values relevant for classification: |
|
|
Oral
Dermal
|
LD50
LD50
|
2000 mg/kg (rat)
20800 mg/kg (rabbit)
|
|
Primary irritant effect: |
|
on the skin |
No irritant effect. |
|
on the eye |
No irritating effect. |
|
Sensitization |
No sensitizing effects known. |
|
Additional toxicological information: |
When used and handled according to specifications, the product does not have any harmful effects to our experience and the information provided to us.
The substance is not subject to classification according to the latest version of the EU lists. |
General notes: Water hazard class 1 (German Regulation) (Assessment by list): slightly hazardous for water Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Product:
Recommendation Smaller quantities can be disposed of with household waste.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
Recommended cleansing agents: Water, if necessary together with cleansing agents.
Land transport ADR/RID (cross-border)
ADR/RID class: -
Maritime transport IMDG:
IMDG Class: -
Marine pollutant: No
Air transport ICAO-TI and IATA-DGR:
ICAO/IATA Class: -
Labelling according to EU guidelines:
Observe the general safety regulations when handling chemicals.
The substance is not subject to classification according to EU lists and other sources of literature known to us.
This information is based on our present knowledge.However, this shall not constitute a guarantee for anys pecific product features and shall not establish a legally valid contractual relationship.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.