Request a quote
Pricing and availability for Carbon Black
are provided on request. Send us your requirement and packing size and our
team will get back to you.
Part No: RXSOL-81-8110-025
Enquire about this product
← Back to all products
Safety data (MSDS)
|
Product Name |
RXSOL-81-8110-025 |
|
Product Type |
Carbon Black |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
|
Phone |
+91 22 65113333 / 5555 / 9999 |
|
Fax |
+91 22 2781 1318 :::AOH :0091 9821214367 |
|
Email |
mail@rxmarine.com |
|
Carbon Black |
Amorphous (>98%) |
|
Chemical formula |
C |
|
CAS number |
1333-86-4 |
|
Inhalation |
Temporary discomfort to upper respiratory tract may occur due to mechanical irritation when exposures are well above the occupational exposure limit. |
|
Ingestion |
No evidence of adverse effects from available data. |
|
eye contact |
High dust concentrations may cause mechanical irritation to eye. |
|
skin contact |
May cause mechanical irritation, soiling, and skin drying. |
|
Sensitization |
No cases of sensitization in humans have been reported. |
|
Chronic Effects |
|
|
Potential Environmental Effects |
No significant environmental hazards are associated with carbon black release to the
environment. Carbon black is not soluble in water. See Section 12. |
|
Inhalation
|
Take affected persons out in fresh air. If necessary., restore normal breathing through standard first aid measures |
|
Skin
|
Wash skin with mild soap and water. If symptoms develop, seek medical attention.
|
|
Eye
|
Rinse eyes thoroughly with large volumes of water keeping eyelid open. If symptoms develop, seek medical attention. |
|
Ingestion |
Do not induce vomiting. If conscious, give several glasses of water, rinse mouth with water. Never give anything by mouth to an unconscious person. |
|
Ingestion |
Do NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person. Loosen tight clothing such as a collar, tie, belt or waistband. Get medical attention if symptoms appear. |
|
Note to physicians |
Treat symptomatically. |
|
Flammable Properties |
It may not be obvious that carbon black is burning unless the material is stirred and sparks are apparent. Carbon black that has been on fire should be observed closely for at least 48 hours to ensure no smoldering material is present. Carbon blacks containing more than 8% volatile materials may form an explosive dust-air mixture. Manufactured carbon blacks do not exceed 8% volatile materials content (unless otherwise noted by the supplier on package and MSDS). See Section 9, Chemical and Physical Properties. |
|
Extinguishing Media |
Use foam, carbon dioxide (CO2), dry chemical, or water fog. DO NOT USE high pressure water stream as this may spread burning powder (burning powder will float). |
|
Protection of Firefighters |
Wear full protective fire fighting gear (Bunker gear) including self-contained breathing apparatus (SCBA). Special hazards arising from the chemical (e.g. nature of any hazardous combustion products) include carbon monoxide (CO), carbon dioxide (CO2), and oxides of sulfur. NOTE: Wet carbon black produces slippery walking surfaces. |
|
Personal Precautions
|
Wear appropriate personal protective equipment and respiratory protection. |
|
Environmental Precautions
|
Carbon black poses no significant environmental hazards. As a matter of good practice, minimize contamination of sewage water, soil, groundwater, drainage systems, or bodies of water. |
|
Methods for Containment |
Carbon black is not a hazardous substance under the Comprehensive Environmental Response, Compensation and Liability Act |
|
Handling |
Avoid dust exposures above the occupational exposure limit. Use local exhaust ventilation to control exposures to below occupational exposure limit. Avoid contact with skin and eyes. If exposed, wash to avoid mechanical irritation and soiling. Dust may cause electrical shorts and is capable of penetrating electrical equipment unless tightly sealed. Ensure equipment is tightly sealed. If hot work (welding, torch cutting, etc.) is required the immediate work area must be cleared of carbon black product and dust.
|
|
Storage |
Store in dry place away from ignition sources and strong oxidizers. Before entering closed vessels and confined spaces containing carbon black test for adequate oxygen percent content, flammable gases and potential toxic air contaminants (e.g., CO, SO2). Follow safe practices when entering confined spaces. |
|
Engineering Controls
|
Use process enclosures and/or exhaust ventilation to keep airborne dust concentrations below the occupational exposure limit.
|
|
Respiratory |
Approved respirators should be used where airborne concentrations are expected to exceed occupational exposure limits.
|
|
Hand Protection |
Wash hands and other exposed skin with mild soap. Use of a barrier cream may help to prevent skin drying. General protective gloves may be used to protect hands from carbon black soiling. |
|
Eye Protection |
Wear safety glasses or goggles. |
|
Skin Protection |
Wear general protective clothing to minimize skin contact. Work clothes should NOT be taken home and should be washed daily. |
|
General Hygiene Considerations |
Emergency eyewash and safety shower should be in close proximity. Wash hands and face thoroughly with mild soap before eating and drinking. |
|
Appearance |
powder or pellet |
|
Color |
black |
|
Odor |
odorless |
|
Odor threshold |
not applicable |
|
Melting point/range |
not applicable |
|
Boiling point/range |
Not available. |
|
Vapor pressure |
Not available. |
|
Evaporation rate |
not applicable |
|
Density: (20ºC) |
1.7 – 1.9 g/ml |
|
Bulk density |
1.25-40 lb/ft3, 20-640 kg/m3 |
|
Pellets |
200-680 kg/m3 |
|
Powder (fluffy) |
2-lbs/ft3, or 20-380 kg/m3 |
|
Solubility (in Water) |
Insoluble |
|
pH value:(ASTM 1512) |
>7 [50 g/l water, 68ºF (20ºC)] |
|
Partition coefficient (n-octanol/water) |
Not available. |
|
Viscosity |
Not available. |
|
Decomposition temperature |
572ºF (300ºC) |
|
Flashpoint |
not applicable |
|
Flammability Classification (as defined by OSHA 1910.1200) |
not applicable |
|
Lower |
50 g/m3 |
|
Lower |
375 g/m3 |
|
Upper |
not determined |
|
Maximum Absolute Explosion Pressure |
10 bar |
|
Maximum Rate of Pressure Rise1 |
30-100 bar/sec |
|
Spontaneous Ignition (Autoignition) |
>284ºF (>140ºC) |
|
BAM Furnace |
>932ºF (>500ºC) |
|
Godbert-Greenwald Furnace |
>600ºF (>315ºC) |
|
Minimum Ignition Energy |
>10 J |
|
Burn Rate (VDI 2263, EC 84/449) |
>45 seconds (not classifiable as “Highly Flammable”, or “Easily Ignitable”) |
|
Stability
|
stable under normal ambient conditions
|
|
Conditions to avoid
|
prevent exposure to high temperatures and open flames |
|
Materials to avoid
|
strong oxidizers such as chlorates, bromates, and nitrates |
|
Hazardous decomposition products
|
Carbon monoxide, carbon dioxide, organic products of decomposition, oxides of sulfur (sulfoxides) form if heated above decomposition temperature. |
|
Hazardous polymerization
|
Will not occur. |
|
Component(s) |
|
|
Carbon Black |
Amorphous (>98%) |
|
Chemical formula |
C |
|
CAS number |
1333-86-4 |
|
Mobility |
Not soluble in water. Not expected to migrate |
|
Known or predicted distributio |
Not soluble in water. Expected to remain on soil surface |
|
Bioaccumulation Potential |
Bioaccumulation is not expected due to physicochemical properties of the substance |
|
Container/Packaging |
Return reusable containers to manufacturer. Paper bags may be incinerated, or recycled, or disposed of in an appropriate landfill in accordance with national and local laws |
N/A
N/A
The information contained in this safety data sheet is given in good faith. It is accurate to the best of our knowledge and belief and represents the most up to date information. The information given in this data sheet does not constitute or replace the users own assessment of workplace risk as required by other health and safety legislation.
.DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.