|
Product Name |
RXSOL-19-1497-025 |
|
Product Type |
Alum Powder |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kolkata, Chennai, Gandhidham, Visakhapatnam, Fujairah, Muscat
|
Phone |
+91 22 27815541 / 42 |
|
Fax |
+91 22 2781 1318 :::AOH :0091 9821214367 |
|
Email |
mail@rxmarine.com |
Product Name: Dry Alum (Aluminum sulfate)
CAS No: 16828-12-9
Formula: Al2(SO4)3●14 H2O
This material is classified hazardous under OSHA regulations in the United States and the WHMIS Controlled Product Regulation in Canada.
|
Odour
|
Odourless
|
|
Appearance
|
Solid. (Granules or powder.)
|
|
Contact with eyes
|
The dust becomes acidic following contact with moisture in the eye and may result in moderate to severe irritation to eyes.
|
|
Contact with skin
|
The dust becomes acidic following contact with moisture on the skin and mild to moderate irritation can occur. Aluminum is very poorly absorbed through the skin and toxic effects would not be expected following short-term skin contact. Prolonged and repeated exposure to dilute solutions may cause irritation, redness, pain and drying and cracking of the skin.
|
|
Inhalation
|
Dusts of aluminum sulfate hydrate probably cause irritation of the nose, throat and respiratory tract based on pH. The dust becomes acidic following contact with moisture in the air or tissues of the respiratory tract.
|
|
Ingestion
|
May cause irritation of the lining of the stomach. Ingestion is not a typical route of occupational exposure
|
|
Medical conditions aggravated by overexposure |
Skin irritation may be aggravated in individuals with existing skin lesions. Breathing of dust may aggravate acute or chronic asthma and chronic pulmonary disease such as emphysema and bronchitis. |
|
Over-exposure |
Prolonged or repeated contact with dust may cause redness, dryness and itching of the skin (dermatitis). |
|
Contact with skin
|
Flush skin with lukewarm running water for a minimum of 5 minutes or until the chemical is removed. Start flushing while removing contaminated clothing. If irritation persists, repeat flushing and obtain medical attention. Do not transport victim unless the recommended flushing period is completed or flushing can be continued during transport. Discard heavily contaminated clothing and shoes in a manner, which limits further exposure. Otherwise, wash clothing separately before reuse.
|
|
Contact with eyes
|
Immediately flush eyes with lukewarm, gently running water for a minimum of 5 minutes or until the chemical is removed. Hold eyelids open during flushing. If irritation persists, repeat flushing. Obtain medical attention IMMEDIATELY. Do not transport victim until the recommended flushing period is completed unless flushing can be continued during transport
|
|
Ingestion
|
If irritation or discomfort occur, obtain medical advice immediately.
|
|
Inhalation |
Move victim to fresh air. If irritation persists, obtain medical attention immediately. Give artificial respiration ONLY if breathing has stopped. Give Cardiopulmonary Resuscitation (CPR) if there is no breathing AND no pulse. Obtain medical attention IMMEDIATELY |
Extinguishing Media: Use media suitable to extinguish surrounding fire.
Fire Fighting Methods and Protection: Firefighters should wear full protective equipment and NIOSH approved self-contained breathing apparatus.
Fire and/or Explosion Hazards: In case of fire and/or explosion do not breathe fumes. Contact with water produces sulfuric acid.
Hazardous Combustion Products: Sulfur Oxides, Aluminum oxide dust.
|
Small spill and leak
|
Shovel into clean, dry, labelled containers and cover. Flush area with water. Do not get water inside containers or on spilled material.
|
|
Large spill and leak
|
Prevent solids from mixing with water or entering sewers or waterways. Shovel into clean, dry, labelled containers and cover. If liquid is present, dike with inert material (sand, earth, etc.). Consider in situ neutralization and disposal. Ensure adequate decontamination of tools and equipment following clean up. Comply with Federal, Provincial/State and local regulations on reporting releases. Deactivating Chemicals: Lime, limestone, soda ash, sodium bicarbonate, dilute sodium hydroxide, dilute aqua ammonia
|
|
Handling
|
Dry Alum is an irritating solid. Avoid generating dusts. Do not breathe dusts. Do not ingest. Do not get in eyes, on skin or on clothing. Use proper tools when opening containers. Keep containers closed when not in use. Empty containers may contain hazardous residues. When there is a large-scale use, do not use in areas equipped with sprinkler systems. Post “DO NOT USE WATER” signs. Good housekeeping is important to prevent accumulations of dust. Dry sweeping is not recommended.
|
|
Storage |
Keep container tightly closed. Keep container in a cool, dry, well-ventilated area. Store away from incompatible materials such as strong bases. Post warning signs.
|
|
EEngineering controls
|
Use process enclosures, local exhaust ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. If user operations generate dust, fumes or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit.The most effective measures are the total enclosure of processes and the mechanization of handling procedures to prevent all personal contact. Use a corrosion resistant ventilation system separate from other exhaust ventilation systems.
|
|
Personal protection
|
Eyes :Splash goggles
Body:Lab coat or coveralls.
Respiratory:NIOSH/MSHA approved dust mask, for dust concentrations of up to 10 mg/m3 . Air-purifying respirator equipped with acid gas/fume, dust, mist cartridges for concentrations up to 20 mg/m3 . An air-supplied respirator if concentrations are higher or unknown.
Hands :Gloves: Neoprene, PVC, vinyl or rubber.
Fee:Appropriate industrial footware.
|
|
Odour
|
Odourless
|
|
Appearance
|
Solid. (Granules or powder.),White.
|
|
Molecular weight
|
594.4 g/mole
|
|
Molecular formula
|
Al2(SO4)3.14 H2O
|
|
pH
|
> 2.9 @ 5%.
|
|
Boiling/condensation point
|
Not available.
|
|
Melting/freezing point
|
86°C (186.8°F)
|
|
Specific gravity Vapor
|
Not available.
|
|
pressure Vapor density
|
Not available.
|
|
Odor threshold |
Not available.
|
|
Evaporation rate |
Not available.
|
Stability and reactivity:The product is stable.
Incompatibility with various substances :Strong bases such as sodium hydroxide. Reaction may be violent.
Hazardous decomposition products :Sulfuric acid vapors may be released upon heating and sulfur dioxide and sulfur trioxide may be released upon decomposition.
Hazardous polymerization :Will not occur.
Information on Toxicological Effects - Product
Acute Toxicity (Oral): Not classified
Acute Toxicity (Dermal): Not classified Acute Toxicity (Inhalation): Not classified
LD50 and LC50 Data: Not available
Skin Corrosion/Irritation: Causes skin irritation.
pH: >2.9 @ 5%
Eye Damage/Irritation: Causes serious eye irritation.
pH: >2.9 @ 5%
Respiratory or Skin Sensitization: Not classified
Germ Cell Mutagenicity: Not classified
Carcinogenicity: Not classified
Specific Target Organ Toxicity (Repeated Exposure): Not classified
Reproductive Toxicity: Not classified
Specific Target Organ Toxicity (Single Exposure): May cause respiratory irritation.
Aspiration Hazard: Not classified
Symptoms/Effects After Inhalation: Irritation of the respiratory tract and the other mucous membranes.
Symptoms/Effects After Skin Contact: Redness, pain, swelling, itching, burning, dryness, and dermatitis.
Symptoms/Effects After Eye Contact: Contact causes severe irritation with redness and swelling of the conjunctiva.
Symptoms/Effects After Ingestion: Ingestion may cause adverse effects.
Chronic Symptoms: None expected under normal conditions of use.
|
Toxicity
|
Ecology - General: Harmful to aquatic life with long lasting effects. Harmful to aquatic life.
|
|
Mobility in soil
|
Data are not available.
|
|
Persistence and Degradability
|
May cause long-term adverse effects in the environment.
|
|
Bioaccumulative Potential
|
Not established.
|
|
Other Information
|
Avoid release to the environment.
|
|
Waste Disposal Recommendations:
|
: Dispose of contents/container in accordance with local, regional, national, territorial, provincial, and international regulations
|
|
Additional Information
|
Container may remain hazardous when empty. Continue to observe all precautions
|
|
Ecology - Waste Materials:
|
Avoid release to the environment. This material is hazardous to the aquatic environment. Keep out of sewers and waterways |
The shipping description(s) stated herein were prepared in accordance with certain assumptions at the time the SDS was authored, and can vary based on a number of variables that may or may not have been known at the time the SDS was issued. Not regulated for transport according to: US DOT, IMDG, IATA, and Canada's TDG.
TSCA Status: All components in this product are on the TSCA Inventory.
Chemical Name CAS § 313 Name § 304 RQ CERCLA RQ § 302 TPQ CAA 112(2)
Aluminum Sulfate, 18-Hydrate Number TQ
10043-01-3 No 5000lb 5000 Ib final No No
RQ RQ; 2270 kg
final RQ
TThe information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents.The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product .in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.